Alpine Trail E1
See this bike in a different color:
- Price: $4,999.00*
- Suspension: X-Fusion Trace 36RC 29" / RockShock Super Deluxe Coil R
- Frame: Aluminium
-
Size Range:
S, M, L, XL
Size Rider height range S 5'3" to 5'6" M 5'6" to 5'10" L 5'10" to 6'2" XL 6'2" to 6'4"
Manufacturer’s suggested retail price may not include additional shipping or preparation charges. Please contact your local Marin dealer for a quote.
- Shimano 630Wh battery
- X-Fusion Trace 36RC / RockShox Super Deluxe Coil R suspension
- Shimano Deore 11-speed drivetrain w/11-51t cassette
Highlights
- System
- Shimano Steps EP6
- Max torque
- 85Nm
- Max assisted speed
- 25 km/h
- Battery capacity
- 630Wh
- Range
- 19-50 miles / 30-80km*
- Rider app
- Shimano E-TUBE RIDE
Highlights Disclaimers
* Based on rider weight, terrain, climate and level of assistance used.
The Marin Alpine Trail E1 sits squarely in the middle of the Alpine Trail family, packing performance and value in equal measure. Go E1 and you’ll get an upgrade to a 630Wh battery, X-Fusion Trace 36RC / RockShox Super Deluxe Coil R suspension and a long-lasting, tough and reliable Shimano 11-speed Deore drivetrain.
Gallery
Specifications
-
FRAME
Series 4 Alloy Frame, 150mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
-
FORK
X-Fusion Trace 36 RC, 160mm Travel, 29", 110x15mm Bolt-On Axle, 44mm Offset
-
SHOCK
RockShock Super Deluxe Coil R, Rebound Adjustment, 205x65mm, 25mmxM8 Lower Hardware, S/M Spring Rate = 300lb, L/XL Spring Rate = 400lb
-
RIMS
Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
-
HUB REAR
Shimano HB-MT400B, 148x12mm, Centerlock, Standard Freehub Body
-
HUB FRONT
Shimano MT-410B, 110x15mm, centerlock Disc, 32H
-
SPOKES
14g Black Stainless Steel
-
TIRES
Front: Vee Tire Co. Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Rear: Vee Tire Co. Crown Gem, 27.5x2.8”, TACKEE Compound, Tubeless Compatible
-
DERAILLEUR REAR
Shimano Deore, Direct Attachment, 11-Speed, SGS
-
SHIFT LEVER
Shimano Deore, 11-Speed, I-Spec EV
-
CRANKSET
Shimano EM600, 160mm Length, 38t Chainring
-
MOTOR
Shimano Steps EP6 Drive Unit, 250W, 85Nm, 25 km/h Top Assisted Speed
-
CHAIN
KMC X-10E, Silver
-
CASSETTE
SunRace 11-Speed, 11-51T
-
BRAKES FRONT
Shimano MT420, 4-Piston Hydraulic Disc, Metallic Pads, 203mm Rotor
-
BRAKES REAR
Shimano MT420, 4-Piston Hydraulic Disc, Metallic Pads, 203mm Rotor w/ Speed Sensor
-
BRAKE LEVERS
Shimano SLX Levers, I-Spec EV
-
HANDLEBAR
Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
-
STEM
Marin 3D Forged Alloy, 35mm
-
GRIPS
Marin Grizzly Lock On
-
HEADSET
FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
-
SEATPOST
TranzX, YSP23JL, 1x Remote, Size S 150mm Travel, Size M and L 170mm Travel, Size XL 200mm Travel, 30.9mm
-
SADDLE
Marin eMTB Saddle
-
PEDALS
Marin MTB Plastic
-
BATTERY
BT-EN806 Internal 630Wh
-
DISPLAY
Shimano SC-E600
-
SWITCH
SW-E7000 Left Hand Switch for Assist Mode Change
-
EXTRAS
Shimano Battery Charger EC-E6002, Shimano CS-EN800 Chainguide, CushCore, 29" Pro Front, Plus Rear, with CushCore Valve Stems, Marin Tire Sealant 300ml, Squeeze Top with Valve Core Removal Tool Cap
-
Range, Charging Time
30-80km (Based on Rider Weight, Terrain, Climate and Level of Assist Used), 4 Hours (estimated, under ideal conditions)
Specifications, pricing, and availability are subject to change without notice.
Geometry
| S | M | L | XL | |
|---|---|---|---|---|
| Stack | 613 | 622 | 631 | 640 |
| Reach | 445 | 465 | 485 | 505 |
| Headtube Angle | 63° | 63° | 63° | 63° |
| Headtube Length | 100 | 110 | 120 | 130 |
| Seattube Angle | 78° | 78° | 78° | 78° |
| Seattube Length | 390 | 400 | 425 | 430 |
| Toptube Effective | 575 | 597 | 619 | 641 |
| BB Height | 340.5 | 340.5 | 340.5 | 340.5 |
| BB Drop | 28 | 28 | 28 | 28 |
| Chainstay | 435 | 435 | 435 | 435 |
| Wheelbase | 1215 | 1239 | 1264 | 1288 |
| Standover Height | 681.6 | 681.4 | 686.8 | 689.8 |
| Fork Offset | 44 | 44 | 44 | 44 |
| Seatpost Diameter | 30.9 | 30.9 | 30.9 | 30.9 |
| Handlebar Width | 780 | 780 | 780 | 780 |
| Stem Length | 35 | 35 | 35 | 35 |
| Crank Length | 160 | 160 | 160 | 160 |
All lengths in millimeters
Technology
SERIES 4 ALUMINUM FRAME
Alpine Trail E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.
MULTITRAC SUSPENSION
Marin developed the all-new Series 4 aluminum frame in conjunction with the new human-powered Alpine Trail models and notable new features shared between the platforms. Firstly, travel has been increased by 10mm at both ends, now standing at 170mm (f) and 160mm (r), which is also an increase of 10mm beyond the current Shimano-equipped models. MultiTrac 2 LT (“Long Travel,” 150mm+), with rear pivots relocated from the seatstays to chainstays, makes its eMTB debut and delivers the suspension performance and tunability demanded of the longer travel. With MultiTrac 2 LT, the benefits of relocating the rear pivot points from the seatstay to the chainstay become apparent, as it reduces anti-rise, allowing for better chassis control while braking, more mid-stroke support, and better feel at bottom out. Furthermore, relocation of the pivots provides the added benefit of allowing for adjustable chainstay lengths and bottom bracket heights. Ultimately, it’s a better-riding, better-performing suspension system made possible by the new pivot placement.
The Shimano-equipped Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system. With this combination there is no need for platform or lockout levers, just get on and blast up the hills. 160mm front/150mm rear travel.
ADJUSTABLE GEOMETRY
Adjustable geometry features are new to the Alpine Trail E Bosch models—integrated chainstay flip chips and an adjustable headset yield six possible configurations to suit a variety of trails best.
Flip chips are easy to reconfigure trailside and are quickly changed using a 6mm hex wrench. They require no additional parts and incorporate laser-etched graphics that indicate the position of the chips. Furthermore, the flip chips located at the seatstay pivots alter the bottom bracket height and chainstay length (low BB/long CS setting = 347/443mm, high BB/short CS setting = 352/435mm) so that riders can perfectly dial their bike in to match the terrain they are looking to conquer.
Finally, using our proprietary headset cups and inserts, the headtube angle can be adjusted to +0.75° or -0.75° from the standard 63° position, giving the rider three options to best suit their preferences.
MIXED WHEEL SIZES
29” front and 27.5”+ rear wheel sizes are the ideal combination for the Alpine Trail E, with larger front wheel easily rolling over most any trail obstacle and offering the best cornering traction, while the burly 27.5” x 2.8” rear setup adds playfulness and enhances acceleration and braking traction.
PROTECTION
Shimano models: A stout and durable rubber guard protects the chainstay, while a durable and replaceable guard on the leading edge of the drive unit keeps the internals safe from whatever the rider is likely to kick up on the trail. CushCore inserts enhance tire performance and traction while also protecting the rims on the Alpine Trail E2 and E1 models.
Bosch models: Chainstays and seatstays are protected with durable rubber guards that minimize noise and protect paint finishes. Made from a 30% fiberglass-infused nylon, similar to what is used on safety and football helmets, the moto-inspired integrated downtube guard helps deflect errant rocks, logs, or anything else riders may encounter on the trail. This guard also includes drain ports to let moisture flow from the frame. Cable ports are of an all-new design and keep the frame innards sealed. These ports use rubber membranes punctured during initial assembly and seal around the housing or hose once inserted. Out at the wheels, CushCore inserts enhance tire performance and traction while also protecting the rims on both models.
SERIES 4 ALUMINUM FRAME
Alpine Trail E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.
MULTITRAC SUSPENSION
The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system. With this combination there is no need for platform or lockout levers, just get on and blast up the hills.
MIXED WHEEL SIZES
29” front and 27.5”+ rear wheel sizes are the ideal combination for the Alpine Trail E, with larger front wheel easily rolling over most any trail obstacle and offering the best cornering traction, while the burly 27.5” x 2.8” rear setup adds playfulness and enhances acceleration and braking traction.
DROPPER POST OPTIMIZED
The modern day trail rider needs their saddle out of the way at times, while low-slung frames require longer length posts. On the Alpine Trail E, seat tube lengths have been minimized, along with minimum insertion depths, so that riders of all sizes can get the proper extension needed.
Suspension Setup
REAR SHOCK SET UP
Recommended Sag = 30%/19.5mm
Step 1: Use your finger to slide the rubber bump stop (on the shock shaft) up to the seal head.
Step 2: Sit on the bike and put all of your weight on the bike. Do *not* cycle the suspension.
Step 3: Measure sag (from shock body to bumper), If it does not match the bike’s recommended sag in millimeters repeat process, and replace coil spring with appropriate rate.
Step 4: Adjust rebound setting to ensure proper control.
FORK SET UP
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
Rock Shock Super Deluxe Coil R
| LBS | KG | COIL LB/IN |
|---|---|---|
| 120 | 54 | 300 |
| 130 | 59 | 300 |
| 140 | 64 | 300 |
| 150 | 68 | 300 |
| 160 | 73 | 350 |
| 170 | 77 | 350 |
| 180 | 82 | 350 |
| 190 | 86 | 400 |
| 200 | 91 | 400 |
| 210 | 95 | 400 |
| 220 | 100 | 400 |
| 230 | 104 | 450 |
| 240 | 109 | 450 |
| 250 | 113 | 450 |
| 260 | 118 | 450 |
| 270 | 122 | 450 |
You May Also Like
